SmartStart Digital Ballast 600w
The SmartStart 600w is another high quality product from the same manufacturer as the Adjusta-Watt Digital Ballast. It incorporates all the same features including Ignition Control and Intelligent Circuit Protection Software but has a fixed output of 600w. The SmartStart 600w provides efficient, reliable and safe lighting for single lamp users and is the best possible solution for automated multiple lamp applications due to its SmartStart Ignition Control Software. Please take time to read through this products impressive list of features.
Each unit comes with a UK power cord, 5 year warranty and full instructions. The power cord is detachable allowing it to be changed if being used outside of the UK.
SmartStart Ignition Control:
This revolutionary feature ensures that the SmartStart Digital Ballast is the safest, most reliable and energy efficient digital ballast when used in automated multiple lamp applications. When multiple units are connected to the mains circuit, our integrated Ignition Control software will completely balance the electrical draw by igniting one lamp at a time to prevent electrical surges and spikes that can overload the mains circuit and trip circuit breaking systems. For further efficiency, this feature coincides with our ‘Soft Start Technology’.
Intelligent Circuit Protection:
The SmartStart Digital Ballast uses a sophisticated software controlled circuit breaking system that is not seen in other manufacturer’s ballasts. The system protects against a series of faults including: Open Circuit Protection, Short Circuit Protection, Over Voltage Protection, Under Voltage Protection and Over Temperature Protection. On Ignition the ballast performs a 3 second test of the circuit and in the event of a fault the ballast will go into protection mode to avoid damage to the ballast and lamp.
Soft Start Technology:
Soft Start Technology prolongs lamp life by stopping current rush to the lamp and preventing lamp overload. When the ballast is started from cold there will be a 3 second fixed delay before ignition. After ignition there will be a series of random 0-2 second delays before full brightness is reached after approximately 3-5 minutes.
Re-Strike of Hot Lamps after Mains Failure:
The SmartStart Digital Ballast uses a timed re-strike system that prevents the ballast from re-striking a hot lamp after a power failure. If a hot lamp is detected, the re-strike will be delayed for 60 second intervals until the lamp has cooled sufficiently to be re-ignited. Re-ignition is then controlled by ‘SmartStart Ignition Control’ and coincides with our ‘Soft Start Technology’ feature.
The SmartStart Digital Ballast is suitable for use with Sodium, Metal Halide and Dual Spectrum lamps.
Automatic Frequency Adjustment:
The SmartStart Digital Ballast automatically adjusts its output frequency to maintain a constant output regardless of input power fluctuations and ageing lamps. This also prevents ‘lamp flicker’.
The unique case design acts as a superior heat sink making the ballast cool running without the need for internal fans.
The SmartStart Digital Ballast has superior RF Shielding with Total Harmonic Distortion (THD) of less than 7% meaning it will not interfere with television or radio equipment.
The SmartStart Digital Ballast has no noisy internal fans and is completely silent in operation.
High Energy Efficiency:
The SmartStart Digital Ballast is up to 30% more efficient than standard magnetic ballasts producing more lumens of light per watt of consumed energy. Efficiency does not diminish and is maintained for the entire life of the unit.
Warranty: 5 Year Limited Warranty.
You may also like…
- £35.00 – £60.00
- £65.00 – £85.00
- £70.00 – £75.00
- £339.00 – £450.00
- £15.00 – £60.00
- £15.00 – £25.00