Used by the grow industry, Professional 400 Volt HPS lamps have a number of key benefits which makes them superior to standard HPS lamps – even ones being run from top-quality digital ballasts.
A 400 Volt HPS lamp is much more efficient than a standard HPS lamp. Both systems consume 1000 watts and therefore cost exactly the same to run but the Pro HPS lamps run at a higher voltage and a lower current. 400 Volt Pro HPS lamps produce more light for the same power consumption and will give at least 10% higher yield compared to even the best standard HPS systems. In fact, when they are seen side-by-side, the HPS Pro lamps are noticeably brighter, run cooler and the light they produce is slightly whiter. So in addition to them giving a higher yield, plants grown under a 400 Volt Pro HPS are healthier, happier and are at less risk of heat damage too.
The way that the system works is that mains power (230 Volts) is fed directly to the combined ballast and reflector via a standard mains power lead. The special ballast then converts the mains electricity to drive the special 400 Volt / 1000 Watt Philips Master GreenPower Plus lamp. The distance from the ballast to the lamp is very short, meaning that virtually no power is lost through the connecting cable.
400 Volt / 1000 Watt Pro HPS Philips Master GreenPower Plus lamps maintain their efficiency and light output for much longer than standard HPS lamps. In fact they will normally last at least a year before they need to be changed out. It should be noted that normal HPS lamps and 400 Volt Pro HPS lamps are NOT interchangeable with different ballasts. Standard HPS lamps should only be used with standard or digital 230 Volt ballasts. 400 Volt Pro HPS lamps should only be used in lighting systems with a 400 Volt Pro HPS ballast. 400 Volt Pro HPS lamps can be identified by the HPS EL marking on them.
The highest output (light) due to the overdrive boost and 400V UHF technology
Miro Silver Reflector with Single Bounce Clear Sight (SBCS) principle
Highly efficient – puts out 2.1 micromole (µmol) per watt
The broadest dimming range of all digital ballasts
Soft-Start, Soft-Dim, Soft-Off function
Can be dimmed manually in 8 levels including the “off” position.
Can be variably dimmed and controlled via the Maxi Controller (not included)
Extensive diagnostic LEDs
EOL function (End Of Life indication to replace lamps)
Safety features for preventing short circuits, open contact, high temperatures, too low voltage, too high voltage
SBCS -Single Bounce reflector ensures minimal light loss
Brighter, cleaner light for maximum yield
Less Heat – reduced risk of heat damage to plants
Reduce cooling costs
No loss of vertical space – ideal for rooms with low or high ceilings
Dimensions 675 x 275 x 130mm (26.5” x 10.8” x 5.1”)
Weight 6.3kg (13.88lbs)
Delivery & Returns
Our standard delivery rate is £6.95 for all UK Mainland orders. There will be additional charges for regional and heavy items. We aim to have all orders delivered within 1-3 working days (stock permitting). Deliveries are made between 8.00 am – 6.00 pm and will need to be signed for, therefore please make sure someone is present at the delivery address during these hours.*
If you want to return an item, please call us on 0161 339 1673 / firstname.lastname@example.org within 30 days and we will instruct you on how to return your item to us – the item must be unused and in its original packaging in order to receive a full refund.
Have questions? Please give us a call on 0161 339 1673, WhatsApp us on 07968 123 456 or email us on email@example.com
Free Shipping on all UK orders over £200
Contact Us on 07968 123456 for a quick response
28 DAYS RETURN
Simply return it within 28 days for an exchange/refund*